Rugs

The special quality of our bath rugs stems from the weave density and height of the pile yarn, which reaches 30 mm in our models.

Care Instructions (Cotton-Acrylic-Polyamide)

Wash your rug seperately from other laundry by hand or in washing machine at low speed setting at 30 ⁰C.

Do not wring after washing; hang up wet with pile side faced up.

Solid stains should be removed from the surface by a spatula, liquids by a paper tissue. Stain should be wiped from side to the center otherwise it spreds over the surface. Never rub the surface by pressure during the cleaning process. It may be necessary to repeat stain removal process several times when stain is still visible after drying the surface.

Only the foam of the shampoo should be applied during stain removal process. Water temperature should not exceed  30 ⁰C. Never use bleaching agent, acid or chemicals to remove the stain. Rug should be cleaned by water and then dried.

Rug with the latex back does not slide due to the high friction and prevents home accidents. Floor surface should be dry before spreading the rug. Never expose the latex back to the sun light for a long time.

Do not pull the pile on the surface and cut any pile which comes out of the surface.

Stained surfaces by solid or liquid material is a result of the misuse of the product and producer will not be responsible if the stain can not be removed successfully.

Deformations resulted from flooding or erroneous application for cleaning purposes is not covered by warranty.

Color and appearance variances on the latex surface after exposing to the direct sun light for longer period is not covered by warranty.

Deformations resulted from cleaning by pressurized water and brush is not covered by warranty.

Overlock stitching and tape on the edges will unravel or tear if the rug is pulled out under heavy objects and is not covered by warranty.

Wash all parts of a set together in order to avoid uneven lightening. Naturally our bath carpets are suitable for use on heated floors.

Caution For Cotton Bath Rugs
Wash you, cotton rug in a pillow case to prevent filter clogging. It is necessary to wash in pillow case because of shedding from cotton surface.

When the rug dried, you can revive it by shaking off without flapping or combing the piles with a brush.

It is appropriate to use it in the environments having floor heating.

Rug Care Instructions (Polyamide-Polyproplene)

Rug should be cleaned by the vacuum cleaner periodically to prevent collection of dust between piles. Never shake or pound with a solid material. Daylight may have a negative effect on the surface similar to the other textile products. It is recommended to use a curtain or sunshade to prevent such occurrence.

Keep the rug out of moisture.

In case of crushing under heavy loads, effected area should be brushed and cleaned by the vacuum cleaner.

Solid stains should be removed from the surface by a spatula, liquids by a paper tissue. Stain should be wiped from side to the center otherwise it spreds over the surface. Never rub the surface by pressure during the cleaning process. It may be necessary to repeat stain removal process several times when stain is still visible after drying the surface.

Only the foam of the shampoo should be applied during stain removal process. Water temperature should not exceed  30 ⁰C. Never use bleaching agent, acid or chemicals to remove the stain.

Rug with the latex back does not slide due to the high friction and prevents home accidents. Floor surface should be cleaned before spreading the rug. Never expose the latex back to the harmful effects of the daylight.

Rug should never been folded or blended over and also rolled in the direction opposite to the original rolling position. Rug should never been pressed in rolled position.

Perfumes usually contain dye and chemicals, therefore color and the structure of the rug may change after treatment by such liquids. Such treatments will not be evaluated in the warranty coverage.

Stained surfaces by solid or liquid material is a result of the misuse of the product and producer will not be responsible if the stain can not be removed successfully.

Following conditions are considered out of warranty:

Deformations resulted from flooding or erroneous application for cleaning purposes. Changes in color and appearance of the latex surface after exposing to the daylight. Deformations resulted from cleaning by pressurized water and brushing.

  • Shower Curtains

We make our textile shower curtains from a high-quality polyester fabric that gives the end product its textile feel. Our textile shower curtains are made from a highly durable and easy-to-clean material with a water-resistant finish. They have a reinforced hole band and a weighted hem.

Shower Curtain Instructions (% 100 Polyester)
Rinse your shower curtain with warm water after use and leave the curtain drawn as it dries in order to prevent the formation of mildew.

Make sure your shower area is well ventilated.

Mildew can be removed with bleach. (Procedure: soak the affected area in a mixture of 0,5 litre 7% bleach to 10 litres of warm water for 15-20 minutes, rinse well afterwards and finally wash by hand or machine).